RSS | Advanced Search | Site Map | Text Size a- A+
City of Colorado Springs
We Create Community

NOTE - THE NOTED DISAPPROVED ITEMS MAY NOT CONSTITUTE A COMPLETE LIST OF VIOLATIONS. THE DESIGNER IS TO CONDUCT A COMPLETE RE-REVIEW OF THE PLANS FOR ADDITIONAL VIOLATIONS OF THE STANDARD COMMENTS AND INCORRECT INFORMATION PRIOR TO RESUBMITTING.

 System plans must be picked up within 30 days. All system plans left longer than 30 days will be discarded as abandoned.

TESLA
01323 MOTOR CITY DR

Review DateStatusComment(s)
5/22/2020 AttentionHAMMERS: The information from this permit application must be entered into the HAMMERS program and added to the facilities hazardous materials information. Visit the following link: https://hammers.springsgov.com/ to add the information to the facility.
AttentionEXCEEDS PERMIT QUANTITIES; ANNUAL HAZARDOUS MATERIALS OPERATIONAL PERMIT REQUIRED. COLLECT REQUIRED INFORMATION FOR ANNUAL PERMITTING. Flammable liquids > 5 gal
FYICHEMICAL INVENTORY, AS DECLARED See HMIS in PPRBD plans. All amounts below MAQs. Mainly flammable liquids (windshield wiper fluid, etc).
AttentionINSPECTION REQUIRED. An inspection of this hazardous materials installation/process is required prior to final Certificate of Occupancy/occupancy of the building/commencement of hazardous materials operations. To schedule the hazardous materials inspection, please call 719-385-5978 and follow prompts to schedule the inspection. Please have the plan review number ready before calling.
FYI2015 IFC - SMOKING. Smoking shall be prohibited and "No Smoking" signs provided as follows: 1. In rooms or areas where hazardous materials are stored or dispensed or used in open systems in amounts requiring a permit in accordance with Section 5001.5. 2. Within 25 feet (7620 mm) of outdoor storage, dispensing or open use areas. 3. Facilities or areas within facilities that have been designated as totally "no smoking" shall have "No Smoking" signs placed at all entrances to the facility or area. Designated areas within such facilities where smoking is permitted either permanently or temporarily, shall be identified with signs designating that smoking is permitted in these areas only. 4. In rooms or areas where flammable or combustible hazardous materials are stored, dispensed or used. (2015 IFC ?5003.7.1)
FYI2015 IFC - SEPARATION OF INCOMPATIBLE MATERIALS. Incompatible materials in storage and storage of materials that are incompatible with materials in use shall be separated where the stored materials are in containers having a capacity of more than 5 pounds (2 kg) or 0.5 gallon (2 L). Separation shall be accomplished by: 1. Segregating incompatible materials in storage by a distance of not less than 20 feet (6096 mm). 2. Isolating incompatible materials in storage by a noncombustible partition extending not less than 18 inches (457 mm) above and to the sides of the stored material. 3. Storing liquid and solid materials in hazardous material storage cabinets. 4. Storing compressed gases in gas cabinets or exhausted enclosures in accordance with Sections 5003.8.5 and 5003.8.6. Materials that are incompatible shall not be stored within the same cabinet or exhausted enclosure. (2015 IFC ?5003.9.8)
FYI2015 IFC - MARKINGS. Individual containers, cartons or packages shall be conspicuously marked or labeled in an approved manner. Rooms or cabinets containing compressed gases shall be conspicuously labeled: COMPRESSED GAS. (2015 IFC ?5003.5.1)
FYI2015 IFC - HAZARD IDENTIFICATION SIGNS. Unless otherwise exempted by the fire code official, visible hazard identification signs as specified in NFPA 704 for the specific material contained shall be placed on stationary containers and aboveground tanks and at entrances to locations where hazardous materials are stored, dispensed, used or handled in quantities requiring a permit and at specific entrances and locations designated by the fire code official. (2015 IFC ?5003.5)
FYI2015 IFC - LABELING AND SIGNAGE. The fire code official is authorized to require warning signs for the purpose of identifying the hazards of storing or using flammable liquids. Signage for identification and warning such as for the inherent hazard of flammable liquids or smoking shall be provided in accordance with this chapter and Sections 5003.5 and 5003.6. 5703.5.1 STYLE. Warning signs shall be of a durable material. Signs warning of the hazard of flammable liquids shall have white lettering on a red background and shall read: DANGER#FLAMMABLE LIQUIDS. Letters shall be not less than 3 inches (76 mm) in height and 1/2 inch (12.7 mm) in stroke. 5703.5.2 LOCATION. Signs shall be posted in locations as required by the fire code official. Piping containing flammable liquids shall be identified in accordance with ASME A13.1. 5703.5.3 WARNING LABELS. Individual containers, packages and cartons shall be identified, marked, labeled and placarded in accordance with federal regulations and applicable state laws. 5703.5.4 IDENTIFICATION. Color coding or other approved identification means shall be provided on each loading and unloading riser for flammable or combustible liquids to identify the contents of the tank served by the riser. (2015 IFC ?5703.5)
FYI2015 IFC - DESIGN AND CONSTRUCTION OF CONTAINERS, CYLINDERS, AND TANKS. Containers, cylinders and tanks shall be designed and constructed in accordance with approved standards. Containers, cylinders, tanks and other means used for containment of hazardous materials shall be of an approved type. Pressure vessels not meeting DOTn requirements for transportation shall comply with the ASME Boiler and Pressure Vessel Code. (2015 IFC ?5003.2.1)
FYI2015 IFC - DESIGN AND CONSTRUCTION. Piping, tubing, valves, fittings and related components used for hazardous materials shall be in accordance with the following: 1. Piping, tubing, valves, fittings and related components shall be designed and fabricated from materials that are compatible with the material to be contained and shall be of adequate strength and durability to withstand the pressure, structural and seismic stress and exposure to which they are subject. 2. Piping and tubing shall be identified in accordance with ASME A13.1 to indicate the material conveyed. 3. Readily accessible manual valves or automatic remotely activated fail-safe emergency shutoff valves shall be installed on supply piping and tubing at the following locations: 3.1. The point of use. 3.2. The tank, cylinder or bulk source. 4. Manual emergency shutoff valves and controls for remotely activated emergency shutoff valves shall be identified and the location shall be clearly visible, accessible and indicated by means of a sign. 5. Backflow prevention or check valves shall be provided where the backflow of hazardous materials could create a hazardous condition or cause the unauthorized discharge of hazardous materials. 6. Where gases or liquids having a hazard ranking of: Health Class 3 or 4 Flammability Class 4 Instability Class 3 or 4 in accordance with NFPA 704 are carried in pressurized piping above 15 pounds per square inch gauge (psig) (103 kPa), an approved means of leak detection and emergency shutoff or excess flow control shall be provided. Where the piping originates from within a hazardous material storage room or area, the excess flow control shall be located within the storage room or area. Where the piping originates from a bulk source, the excess flow control shall be located as close to the bulk source as practical. Exceptions: 1. Piping for inlet connections designed to prevent backflow. 2. Piping for pressure relief devices. (2015 IFC ?5003.2.2.1)
4/30/2020 FYICHEMICAL INVENTORY, AS DECLARED Flammable liquids, Class IA - 2 gal Flammable Liquids, Class IB - 6 gal Flammable liquids, Class IC - 165 gal Combustible Liquids, Class IIIB - 498 gal Corrosives - 30 gal Flammable solid - 1 lb Oxidizers, Class 3 - 300 lbs
DisapprovedThe code study indicates a paint spray booth to be installed, but no details provided on plans indicating its installation. Note that flammable spray finishing operations shall meet the requirements of Chapter 24. Provide details of spray finishing booth and if it is for flammable spray finishing then ensure that all proper documentation and data is provided to show compliance with all applicable requirements of Chapter 24.
DisapprovedThe quantity of Flammable Liquids, Class IB and IC exceeds the Maxmimum Allowable Quantity of 120 gal, and the amount of Oxidizers, Class 3, exceeds the Maximum Allowable Quantity of 10 lbs. Therefore, the occupancy shall be reclassified to an H-3 occupancy. If this is not intended, please verify and provide data that shows correct amounts or hazard classifications of the chemicals in question.
FYICONTROL AREAS, AS SHOWN ON THIS SUBMITTAL ARE AS FOLLOWS Entire Building


 

Contact Us: Email Us - Call: 385-CITY (719-385-2489) - RSS - Privacy, Linking and ADA Policies - designed, developed by projecta.com

printer friendly version Printer friendly version